CW-AC-14 / CW-AC-15 / CW-AC-16Industrial insulation coating
Industrial Aerogel Insulation Coating
Sprayable or trowel-applied aerogel insulation coating for equipment, valves, elbows and complex industrial surfaces.
- Indicated service range
- -40 °C to 180 °C
- Thermal conductivityConfirm grade and method
- ≤0.04 W/(m·K)
- Application surface
- ≥3 °C above dew point
Overview
Industrial aerogel insulation coating is intended for pipes, valves, flanges and complex equipment where conventional insulation is difficult to fit or maintain.
It is evaluated as a coating system rather than a single wet product: substrate condition, primer, insulation layer, protective finish and curing environment all affect the result.
- Primer
- Confirm a compatible primer for the prepared substrate.
- Aerogel insulation layer
- Define the build and drying intervals for the selected coating.
- Protective finish
- Select the finish for the intended exposure and curing conditions.
Typical applications: Hot equipment, Pipe elbows, Valves and flanges, Burn protection.
Specifications and test basis
Service data
| Property | Value | Basis |
|---|---|---|
| Indicated service range | -40 °C to 180 °C | Supplied industrial application guide; product-system selection still required. |
| Thermal conductivity | ≤0.04 W/(m·K) | Supplied product summary; applicable grade and method must be confirmed. |
Application and system build
| Property | Value | Basis |
|---|---|---|
| Application environment | Surface temperature ≥3 °C above dew point | Supplied industrial application guide. |
| System sequence | Primer + insulation layer + protective topcoat | Supplied industrial application guide. |
Handling and selection limits
Handling / storage
- Confirm surface cleanliness, metal temperature and dew point before application.
- Plan coating build, drying interval and protective topcoat around the equipment operating and shutdown window.
Selection limits
- Not suitable for selection without operating temperature, geometry, surface condition and exposure data.
- Do not use this summary as a corrosion-under-insulation assessment or a substitute for process safety review.
Source documents
| Document | Applicable grade | Availability |
|---|---|---|
| Supplied industrial aerogel insulation coating installation guide. | CW-AC-14 / CW-AC-15 / CW-AC-16 | Request documentation |
Last reviewed: 09 August 2026.
Product FAQ
Can the coating be applied to hot equipment in service?
Confirm the surface temperature, shutdown plan and compatible application window before specifying the system.
What information is needed for a trial?
Provide operating temperature, equipment geometry, current insulation, ambient exposure and available dry-film thickness.
Discuss your application
Share the substrate, temperature and required test standard for a grade-specific review.